Whole-house softener · Fleck

Fleck 5600SXT 48,000-Grain Water Softener

48,000-grain softener for up to 4 people at 15 gpg

Updated October 2026

Quick verdict

A sensible whole-house softener for up to 4 people on 15 gpg water.

Strength
48,000-grain rating.
Trade-off
Service flow not stated.
Right buyer
Up to 4 people on 15 gpg water.
Grain capacity (maker)
48,000 grains
Resin volume
1.5 cu ft
Control valve
Fleck 5600 SXT
Material
Polypropylene
Dimensions (seller)
15"L x 28"W x 62"H
Product weight
53 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it does for your water

The Fleck 5600SXT 48,000-Grain Water Softener is a whole-house softener rated at 48,000 grains on a Fleck 5600 SXT control valve.

Run at an efficient salt setting, its 1.5 cu ft of resin gives about 36,000 grains per regeneration rather than the full rating: enough for up to 4 people on 15 grains-per-gallon water regenerating weekly, or 2 on 25 grains per gallon. Check it against your hardness.

The Fleck 5600 SXT head is one of the most widely serviced valves; seal kits, pistons, boards and meters that name it are in the valve parts lookup.

The listing also gives features listed Programmable; mounting Freestanding; power Manual/Gravity-fed; capacity stated as 1.5 cu ft; model 5600; material Polypropylene.

The listing gives dimensions of 15 in (L) x 28 in (W) x 62 in (H), a shipping weight of 53 lb and complete system in the box.

Is it the right unit for your house?

Choose it when

  • Up to 4 people on 15 gpg water
  • Replacing an older softener

Pass on it when

  • More than 2 people on 25 gpg water
  • Iron above about 5 ppm without an iron filter

Where it wins and where it loses

Wins

  • 48,000-grain rating
  • Fleck 5600 SXT valve
  • 1.5 cu ft of resin

Loses

  • Service flow not stated
  • Requires a drain line and power
  • Adds sodium to softened water (potassium chloride avoids it)

Limits to know about

  • Figures are the maker's or seller's own; check fit and capacity against your water test and your equipment's manual.

Maker's figures

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model number5600Retailer
Features (seller)ProgrammableRetailer
Dimensions (seller)15"L x 28"W x 62"HRetailer
MaterialPolypropyleneRetailer
Mounting / installationFreestandingRetailer
MethodIon ExchangeRetailer
Product weight53 lbRetailer
Model name56-SXT-48K-MRetailer
Grain capacity (maker)48,000 grainsRetailer
Resin volume1.5 cu ftRetailer
Control valveFleck 5600 SXTRetailer

Units to weigh against it

Other water softeners in the catalog

Every water softeners on one grid · All Fleck units we cover

Final verdict

A sensible whole-house softener for up to 4 people on 15 gpg water.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How many people is the Fleck 5600SXT 48,000-Grain Water Softener for?
At an efficient salt setting it delivers about 36,000 grains between regenerations: up to 4 on 15 gpg water, or 2 on 25 gpg, regenerating weekly. Iron adds load: each ppm counts as about 4 gpg.